This part is legal for sale and use on Emissions Controlled Vehicles in all 50 states when used in accordance with the manufacturer's application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number:
The COBB Front Mount Intercooler (FMIC) for your F-150 Raptor is the easiest way to drastically improve power when coupled with tuning from the V3 Accessport. The much larger 24" wide x 14" tall x 3.5" thick core produces a significant volume increase compared to stock, resulting in minimal pressure drop despite the significant increase in size. Straight forward installation requires minor trimming on the back side of the grille and maintains the factory Adaptive Cruise Control bracket when using the stock bumper.
Ford Raptor / Raptor R DD - 4link Kit
Regular price
$17,484.12
Save $-17,484.12
Whats Included:
7075 Billet Lower Aluminum Links
4130 Upper Links
4130 Link Mounts Chassis and Axle Side
4130 1.75in Tubed In Bed Shock Mount Cage
4130 Frame Plating with Lateral Support Tubes Laced In
Billet Lower Shock Clevis's With Custom Spacers
Rear Sway Bar With Sway Bar arms and Links
Rear Brake Lines
Aluminum Skid Plate
Fabricated Aluminum Wheel Wells
Whats Not Included But Required. Reason for not including these items in above list is because many people already have some them on their truck:
SVC Fabricated Housing and axles with EWR 10" 3rd Member
Fox or King 18" 3.0 or 4.0 Bypass Shocks
Fox or King 2.5x2.5 Travel Bump Stops
Fox or King 16" 2.5 C/O's
Fiberwerx Deberti or McNeil +4 Bed Side
Harmon 40 Gallon Underbed Fuel Cell (CARB Legal)
Note:
Must Be Installed By SVCOFFROAD
OVERVIEW:
SVC Offroad's new Daily Driven 4-Link kit is the ultimate in suspension control for your 2021+ Ford Raptor. This kit offers over 20 Inches of rear wheel travel that dramatically transform the capability of your Raptor / F-150. When paired with SVC's front Mid travel kit, your truck will go from fun and fast, to running at the front of the pack no matter what run you're on. This is a traditional and true 4-link setup. No panhard bars or limited short course design. Geometry has been set to achieve amazing traction with excellent body roll control.
The new Link Kit was designed from the ground up utilizing CAD technology and the latest in aerospace engineering to achieve a system that mates perfectly to your chassis. We know how important it is for Raptor owners to maintain their existing bed, so that is what we have done. Gone are the days of chopping off the entire back of your truck, leading to massive long term headaches, diminished value and overly long installs. Our Link kit drops through strategically cut slats and holes in the bed and bolts directly to added pivot points that have been welded directly to the frame. The frame itself gets reinforced with 4130 frame plating and tube gusseting to create triangulation and strength, plus get's tied into a new under the bed 40 gallon fuel cell that maintains CARB compliance, but offers a much better center mass location behind the rear axle. The Bed structure is crafted from the same 4130 chromoly tubing that is found on every Trophy Truck built today. Bed rack layout from tires, gas cans, jack, cooler, battery and fluid tray locations can all be incorporated into the design, or it can be left simple for maximum bed utility.
If you are serious about offroading, and serious about having a no-nonsense truck that eats holes and whoops in the desert, then look no further. The SVC Offroad Ford Raptor Link Kit gives you the ability to finally have your cake, and the ability to eat it too!!!
Note: some images are of Gen 2 Raptor for illustration purchases only.