SVC Offroad

• Made In The USA
• Universal Slotted and drilled Light Mounting tab 
• Grade 8 Hardware
• CNC Bent and Formed
• Satin Black Powdercoat
• Racetrack Inspired Design

OVERVIEW:
The new SVC Offroad Ford Ranger light bar gets you all the light you need without needing to remove your factory bumper!  Direct bolt on and ready to go with multiple lighting combos. Designed to fit both Baja Designs and Rigid Industries RDS Series, your new light bar will is the perfect addition to illuminate the road ahead.

• Made In The USA
• Grade 8 Hardware
• CNC Bent and Formed
• Satin Black Powder Coat
• Skid Plate Now Comes Black Powder Coated
• Racetrack Inspired Design
• Optional Light Bar Configurations.
• Build In Parking Sensors.  
• Made In The U.S.A.

OVERVIEW:

The new SVC Offroad 2019 + Gen 5 Ford Ranger Baja Front Bumper is a sleek and minimalist bumper that transforms the front of your truck into a true desert pre-runner with huge approach angle and sleek lines that give you a true racer feel.  All of our aftermarket bumpers are powder-coated satin black utilizes grade 8 hardware and retains factory parking sensors. Whether you prefer Baja Designs, Rigid or KC Hilites, your new Baja Bumper is the perfect addition to illuminate the road ahead and give you the extra confidence needed to push your truck harder in the dirt.  

• CNC Bent Main Hoop Rolled To Match Factory Valence
• Accepts Most 30" light Bars
• Aggressive Approach Angle
• Precision Welded
• Satin Black Powder Coat
• Skid Plate Now Comes Black Powder Coated
• Grade 8 Hardware
• Crafted In The USA
• Designed for the 2017+ Gen 2 Ford Raptor
• Made In The U.S.A.

NOTE: SVC OFFROAD INTERCOOLER MUST BE RUN WITH THIS BUMPER.. Save $200 When You Combo The Intercooler With The Bumper.

Bumper Install Instructions

• Massive Approach Angle
• CNC Bent and Formed
• Securely Shields Electronic Blow Off Valve
• Sleek Design 
• Skid Plate Now Comes Black Powder Coated
• Grade 8 Hardware
• Simple Installation
• Manufactured In The U.S.A.

NOTE: SVC OFFROAD INTERCOOLER MUST BE RUN WITH THIS BUMPER.. Save $200 When You Combo The Intercooler With The Bumper.

Bumper Install Instructions

OVERVIEW:
When we set out to create our new SVC Offroad 2017+ Gen 2 Ford Raptor Baja Smurf Bumper, we had certain criteria that needed to be met.  The bumper needed to be sleek, lightweight, offer huge approach angles and make sure the relocated electronic blow off valve is protected behind the skid plate and not out in the open risking possible damage, and thus possible engine damage.

Each one of our Baja Frame Cut bumpers are meticulously CNC bent and radiused to contour the unique front fascia of the 2017-20 Ford Raptor.  This process is time-consuming and difficult, but the end results speak for themselves.  Each one of our bumpers in manufactured right here in the U.S.A. and goes through a rigorous QC inspection.  Each bumper is assembled and welded on a perfectly flat and square fixture table that locates each plate and tube exactly where it needs to be to ensure easy installation and proper gaps.

If you're in the market for a truly amazing crafted and well built front bumper that will transform the look of your truck, look no further.  

• Direct Bolt On Replacement 
• Keep Factory Intercooler
• CNC Laser Cut and Bent
• Air Flow Vents For Increased Airflow To Intercooler
• Grade 8 Hardware
• Skid Plate Now Comes Black Powder Coated
• Made In The USA

OVERVIEW
We set out with a vision to make the cleanest looking pre-run bumper on the market for those individuals who want the look of a frame cut bumper, but not actually willing to cut the frame of their new truck. Our 2017+ Gen 2 Ford Raptor Baja Flush Bolt-On Front Bumper is a sleek design that doesn't interfere with the factory intercooler allowing for proper airflow to keep IAT's low, and will still maintain the ability to run a variety of 20" light bars based on our new modular bracket system.

Manufactured right here in the USA with precision and pride.

• CNC Bent Plate
• Precision Welded and Formed
• Tight Contours 
• 30" light Bar Compatible
• Skid Plate Comes Black Powder Coated
• Grade 8 Hardware
• Frame Cut For Massive Approach Angle
• Ken Block Tested and Approved
• Made In The U.S.A.

NOTE: SVC OFFROAD INTERCOOLER MUST BE RUN WITH THIS BUMPER.. Save $200 When You Combo The Intercooler With The Bumper.

Bumper Install Instructions

OVERVIEW:
For years the Raptor bumper market has been swamped with over-designed, to complex-looking plated bumpers that took attention away from the truck, rather than seamlessly blend into the truck as if it was always intended to look that way.  Well, those days are over.  With the introduction of the SVC Offroad Mojave Front Bumper, the status quo has been changed.

The Mojave Front Bumper is the first plate bumper on the market to truly offer a tight, sleek and forward-thinking design to compliment the lines of the 2017+ Gen 2 Ford Raptor.  The approach angle in dramatically increased ensuring safe and bumper digging free nose landings.  The Mojave is crafted right here in the USA, welded and shaped with passion.

If you've been waiting for a plate bumper that doesn't look like an anchor hanging off the front of your Raptor, and are in need of a clean, sleek and stunning front bumper, then we truly believe the Mojave is the bumper for you.