2021+ Ford Raptor Suspension

• Billet Upper and Lower Links
• Duraflex Lower Bushings to Reduce NVH
• Upper Links on Uniballs with Built In Wobble Stoppers
• Direct Bolt On
• Live Valve Attachment Included
  
• Durable Lower Skids Included
• Tighter Driving Feel with Less Deflection
• Three Color Option Available.  Custom Color Add$199 and Longer Lead Times

For years SVC Offroad has been building high performance suspension for both the Gen 1 and Gen 2 Ford Raptors. As time has gone on, many of our products have evolved into bigger, better, sexier and more functional. Brand new to our lineup in aftermarket suspension game is our full Billet Upper Control Arms For the Gen 3 Ford Raptor.

These new Gen 3 Raptor Upper Control Arms have many unique features that make them stand out from the competition.  First and foremost, they have a contour milled into them vs. being a flat arm which puts the outer bearing at to much angle as seen with the competitors arms. This is a very complex process, but ensures that the outer uni-ball is on a better plain with the factory upright.  This results in less bearing wear, and less stress on the overall package, but in our view is worth the extra effort. 

Other key features of these arms are they are fully adjustable for both camber and caster.  These arms allow you to lock in your lower pivots, install the arms and get you an alignment that is right on par with any race-truck out there.  The Billet UCA is hard anodized for greater strength, only uses grade 8 hardware and still features the same 3/4inch 12-point nickel plated center bolt.  What does this mean for you?  Simple.  More strength than any other arm on the market.  

What you get

• Machine Curved For Proper Cup Angle
• Billet Aluminum Outer Bearing Weather Cap
• Optional Colors
• 1.5inch FK Bearings Uni-Ball
• 7/8th FK Bearings Rod-Ends
• Hard Anodized For Greater Strength
• Grade 8 Hardware vs. Prone To Fail Machined Center Pins.
• Crafted In The USA

NOTE: MUST RUN 0 DEGREE OFFSET WHEEL

-Actual product may differ than the picture.

INSTALL INSTRUCTIONS

• Made In The U.S.A.
• Grade 8 Hardware vs. Prone To Fail Machined Center Pins
• 4130 Nickel Plated Machined Clevis
• Hard Anodized Aluminum Rod

Genuine SVC Offroad Tie-Rods machined from aerospace aluminum and hard anodized with a custom machined 4130 nickel plated steering clevis. 

SVC Offroad tie-rods are made right here in the USA with FK Rod Ends, Stainless Steel Misalignments and attached with grade eight hardware. Installing these on your 2021+ Gen 3 Ford Raptor will allow for tighter steering, better looks and overall better performance both on and off-road.  

FOX Factory Race Series 3.2 Live Valve Internal Bypass shocks for the 3rd generation Ford F-150 Raptor deliver semi-active adjustment, position-sensitive damping technology, and plug-and-play integration with OEM electronics in a bolt-on kit.

Patented Internal Bypass technology allows for multiple zones of damping control. The result is a comfortable, confident ride with increased damping force through rough terrain. Internal bypass shocks produce more force progressively to control hard bottom-outs, prevent harsh top-outs, and provide an initial catch for landing. Shock fluid bypasses the main piston through bleed holes in the ride zone. As the shock extends past the ride zone in rebound or compression, the bleed holes terminate, forcing fluid through the main piston.

Recirculating Reservoirs enable a continuous exchange of shock fluid between the finned external reservoir and body using a checked piston, keeping shock temperatures cool for better performance. Type II anodization withstands higher shock pressures and prevents corrosion of the 3.2-inch diameter aluminum bodies. Fine-tune your ride with 3-way quick switch (QS3) adjusters on the eyelets.

FOX 3.2 Live Valve shocks with Internal Bypass provide the support, adjustment, and confidence you need while driving at speed. Experience race-bred performance next time you leave the pavement.

FOX Factory Race Series 3.2 Live Valve Internal Bypass shocks for the 3rd generation Ford F-150 Raptor deliver semi-active adjustment, position-sensitive damping technology, and plug-and-play integration with OEM electronics in a bolt-on kit.

Patented Internal Bypass technology allows for multiple zones of damping control. The result is a comfortable, confident ride with increased damping force through rough terrain. Internal bypass shocks produce more force progressively to control hard bottom-outs, prevent harsh top-outs, and provide an initial catch for landing. Shock fluid bypasses the main piston through bleed holes in the ride zone. As the shock extends past the ride zone in rebound or compression, the bleed holes terminate, forcing fluid through the main piston.

Recirculating Reservoirs enable a continuous exchange of shock fluid between the finned external reservoir and body using a checked piston, keeping shock temperatures cool for better performance. Type II anodization withstands higher shock pressures and prevents corrosion of the 3.2-inch diameter aluminum bodies. Fine-tune your ride with 3-way quick switch (QS3) adjusters on the eyelets.

FOX 3.2 Live Valve shocks with Internal Bypass provide the support, adjustment, and confidence you need while driving at speed. Experience race-bred performance next time you leave the pavement.

• Multi Position Adjustable Bump Can Allows For Added Payload Assistance 
• Choice Of Either Fox or King 2.5 Hydraulic Bump Stops
• Encapsulates Entire Frame and Integrates With Fact Cross Cross
• CNC Laser Cut and Bent Plate
• 360 Degree Frame Encapsulation
• Grade 8 Hardware
• 100% Bolt On
• Works With All Exhaust Systems.
• Included Installation Wrench 
• Specific Bump Can For 35in Or 37in Tire Package
• Works With Basic Gen 3 Or Raptor R.

Quick DIY For Installations

• Lifetime Warranty 
• Aircraft Grade Aluminum
• Increase Spring Pre-Load For Better Bottoming Control
• 1.5" Front End Lift 
• Fail Proof Design With No Chance Of Bolt Failure.  
• Made In The USA
• Price Is For The Pair

DOWNLOAD INSTRUCTIONS HERE 

Shipping Now

 In 2017 we took an entirely different route from the rest of the pack when in came to our Coil-Adjustment-System.  We went for Security and infinite adjustability.  Over the course of those four years, we listened to your customer base and have simplified our design without sacrificing safety and longevity.  SVCOFFROADS new 2021 GEN 3 Ford Raptor Coil- Adjustment-Spacer is designed to fit securely over the factory spring retainers as designed by Fox, thus making for a fail proof system that is far easier to install and offers the end user the highest level of off-road performance.  

Off-road suspension that sees very hard loads, so don't take chances with parts that have a fail point built into the design for the ease of installation.  Go with the brand that gets the most abuse by some of the rowdiest customers Raptor Nation has come to know...

• 17" of Wheel Travel
• Minimal Welding Required
• Retains Factory Coil-bucket For Greater Strength
• 4wd
• Work For Both Raptor and Raptor R.
• Maintains Factory Electric IWE's
• 300M Factory Diameter Axles

 What you get

• SVC LCA
• SVC  Billet UCA
• SVC Upright
• SVC Tie Rods
• SVC Axles
• SVC Shockmount
• SVC Top-hat
• Stainless Steel Brake Lines
• Fox Or King 3.5" Bypass Shock
• Fox Or King 2.5" Coil-Over
• Custom Springs
• RCV IWE Delete
• Shanked Grade 8 Hardware

OVERVIEW:
SVC Offroad's 2021+ Ford Raptor Gen 3 Mid Travel Kit offers you long travel performance without the headaches of going full long travel.   We've taken what we liked about our dual shock LCA setup and upped the ante to provide Raptor owners a bolt on kit that allows superior damping control, additional ride height and ground clearance without sacrificing one bit of daily driver duties. 

We've designed our Mid Travel Kit using the latest in C.A.D. technology to ensure the absolute best suspension geometry possible and coupled it with thousands of miles real-world testing to dial in shock valving and proper springs rates.  We're 100% confident we have developed a kit that is unparalleled in performance, at a price that is hundreds, if not thousands less than other kits on the market.  So why don't we call our kits long travel like all the other systems on the market, because non of them are long travel in our eyes.  We are all using the same pivot locations, the same steering locations and we are all roughly 3 inches wider per side over a factory Raptor.  The minute you try to squeze and extra inch with to long of a shock, your steering geometry goes out the window and bump steer becomes a massive issue.  

Sleep easy, if you choose to go with SVC, you will have the same travel numbers as the rest of the kits out their without sacrificing the critical geometry of the vehicle.  

NOTE: ALL GEN 3 MIDTRAVEL KITS WILL COME WITH OUR NEW BILLET UPPER CONTROL ARM AS SHOWN IN MAIN PIC

Whats Included:

• 7075 Billet Lower Aluminum Links
• 4130 Upper Links 
• 4130 Link Mounts Chassis and Axle Side
• 4130 1.75in Tubed In Bed Shock Mount Cage
• 4130 Frame Plating with Lateral Support Tubes Laced In
• Billet Lower Shock Clevis's With Custom Spacers
• Rear Sway Bar With Sway Bar arms and Links
• Rear Brake Lines
• Aluminum Skid Plate
• Fabricated Aluminum Wheel Wells

Whats Not Included But Required.  Reason for not including these items in above list is because many people already have some them on their truck:

• SVC Fabricated Housing and axles with EWR 10" 3rd Member
• Fox or King 18" 3.0 or 4.0 Bypass Shocks
• Fox or King 2.5x2.5 Travel Bump Stops
• Fox or King 16" 2.5 C/O's
• Fiberwerx Deberti or McNeil +4 Bed Side
• Harmon 40 Gallon Underbed Fuel Cell (CARB Legal)

Note: 

Must Be Installed By SVCOFFROAD

OVERVIEW:

SVC Offroad's new Daily Driven 4-Link kit is the ultimate in suspension control for your 2021+ Ford Raptor.  This kit offers over 20 Inches of rear wheel travel that dramatically transform the capability of your Raptor / F-150.  When paired with SVC's front Mid travel kit, your truck will go from fun and fast, to running at the front of the pack no matter what run you're on.  This is a traditional and true 4-link setup.  No panhard bars or limited short course design.  Geometry has been set to achieve amazing traction with excellent body roll control.   

The new Link Kit was designed from the ground up utilizing CAD technology and the latest in aerospace engineering to achieve a system that mates perfectly to your chassis.  We know how important it is for Raptor owners to maintain their existing bed, so that is what we have done.  Gone are the days of chopping off the entire back of your truck, leading to massive long term headaches, diminished value and overly long installs.  Our Link kit drops through strategically cut slats and holes in the bed and bolts directly to added pivot points that have been welded directly to the frame. The frame itself gets reinforced with 4130 frame plating and tube gusseting to create triangulation and strength, plus get's tied into a new under the bed 40 gallon fuel cell that maintains CARB compliance, but offers a much better center mass location behind the rear axle.  The Bed structure is crafted from the same 4130 chromoly tubing that is found on every Trophy Truck built today.  Bed rack layout from tires, gas cans, jack, cooler, battery and fluid tray locations can all be incorporated into the design, or it can be left simple for maximum bed utility. 

If you are serious about offroading, and serious about having a no-nonsense truck that eats holes and whoops in the desert, then look no further.  The SVC Offroad Ford Raptor Link Kit gives you the ability to finally have your cake, and the ability to eat it too!!! 

Note: some images are of Gen 2 Raptor for illustration purchases only. 

Transform your truck's offroad capabilities with the SVCOFFROAD Gen 3 Raptor Rear PreRunner Package. This package includes billet links in various colors, our signature adjustable bump system, an adjustable and extended panhard bar, upgraded coil springs, 16inch or 18inch King or Fox Racing Shox external bypass's. Control side-to-side axle swing with ease and enjoy 16in of wheel travel. Are you a diehard enthusiast? This package is the perfect addition to your Gen 3 Ford Raptor 5 Link setup.  

Whats Included:

• SVCOFFROAD Fabricated Rear Differential Housing with 10in Ring and Pinion (optional)
• SVCOFFROAD Extended 4130 Panhard Bar With New Chassis Mounts
• SVCOFFROAD Billet Rear Links
• SVCOFFROAD Adjustable Bump Kit
• SVCOFFROAD Rear Bypass Rack
• Fox or King External Bypass Shocks
• Eibach, Geiser or Icon Rear Springs (18in of travel if using Icon Springs)
• Limit Straps and SVCOFFROAD Tire Straps Included
• Up to 18in of Rear Travel.

NOTE: AFTER CHECKING OUT, CONTACT SVC SALES TEAM TO INFORM WHAT COLOR BILLET LINKS YOU PREFER.  COLORS ARE FOX ORANGE, KING BLUE, BLACK, GREY, RAW.

NOTE: SOME FABRICATION IS REQUIRED FOR INSTALLATION.  

• CNC Cut and Bent Aluminum
• Direct Replacement
• Stronger Than Factory Plastic Guard
• Satin Black Powdercoat
• Made In The USA
• Tested In Baja 
• Sold in PAIRS

Is your Ford Raptors SVCOFFROAD suspension feeling tired and worn out? No worries, replace the FK rodends and bearings with just a click of a button! SVC Upper Control Arm Replacement Bearing guarantees a quick and easy fix, providing you with identical FK replacement parts to maintain your truck's peak performance.

• 4x 7/8th FK Rod Ends
• 4x 7/8th Jam Nuts
• 2x 1.5in FK Uniball 
• 2x 2.5in Snap Rings

*Images May Differ Slightly From Photographs

Is your Ford Raptors SVCOFFROAD Mid Travel suspension feeling tired and worn out? No worries, replace the FK rodends and bearings with just a click of a button! SVC Mid Travel Replacement bearing kit guarantees a quick and easy fix, providing you with identical FK and SVCOFFROAD replacement parts to maintain your truck's peak performance.

• 4x 7/8th Fk Rod-Ends
• 2x 7/8th FK Left Hand Rod Ends
• 2x 1.5in FK Uniball
• 2x 1.0in FK Uniball
• 6x 7/8th Jam Nuts
• 4x 2in SVC Inner Bushings

*Images May Differ Slightly From Photographs