SVC Offroad is dedicated to the needs of the Gen 2 Ford Raptor enthusiast. Below you can find our entire inventory of aftermarket off-road performance parts and accessories specifically for the 2017+ Ford Raptor, such as aftermarket suspension, front and rear bumpers, bypass racks, lighting, and off-road wheels and tires. If you're looking for something even more special for your Raptor, check out our own SVC Offroad branded line of customized Made-in-the-USA suspension, bumper and armor kits. We're proud to help you build the Ford Raptor of your dreams! Shop now!
Regular price
$439.13
Sale price
$417.14
Save $21.99
Is your Ford Raptors SVCOFFROAD suspension feeling tired and worn out? No worries, replace the FK rodends and bearings with just a click of a button! SVC Upper Control Arm Replacement Bearing guarantees a quick and easy fix, providing you with identical FK replacement parts to maintain your truck's peak performance.
4x 7/8th FK Rod Ends
4x 7/8th Jam Nuts
2x 1.5in FK Uniball
2x 2.5in Snap Rings
*Images May Differ Slightly From Photographs
Mid Travel Pivot Replacment Kit
Regular price
$659.02
Sale price
$626.07
Save $32.95
Is your Ford Raptors SVCOFFROAD Mid Travel suspension feeling tired and worn out? No worries, replace the FK rodends and bearings with just a click of a button! SVC Mid Travel Replacement bearing kit guarantees a quick and easy fix, providing you with identical FK and SVCOFFROAD replacement parts to maintain your truck's peak performance.
4x 7/8th Fk Rod-Ends
2x 7/8th FK Left Hand Rod Ends
2x 1.5in FK Uniball
2x 1.0in FK Uniball
6x 7/8th Jam Nuts
4x 2in SVC Inner Bushings
*Images May Differ Slightly From Photographs
Gen 2 Ford Raptor Coil Adjustment Spacer
Regular price
$151.20
Save $-151.20
Lifetime Warranty
Aircraft Grade Aluminum
Increase Spring Pre-Load For Better Bottoming Control
In 2017 we took an entirely different route from the rest of the pack when in came to our Coil-Adjustment-System. We went for Security and infinite adjustability. Over the course of those four years, we listened to your customer base and have simplified our design without sacrificing safety and longevity. SVCOFFROADS GEN 2 Ford Raptor Coil- Adjustment-Spacer is designed to fit securely over the factory spring retainers as designed by Fox, thus making for a fail proof system that is far easier to install and offers the end user the highest level of off-road performance.
Off-road suspension that sees very hard loads, so don't take chances with parts that have a fail point built into the design for the ease of installation. Go with the brand that gets the most abuse by some of the rowdiest customers Raptor Nation has come to know...
Ford Raptor Rear Diff Cover
Regular price
$779.00
Sale price
$759.00
Save $20.00
Pre Order Pricing Going On Now!
Increased Oil Volume
Increased Oil Cooling
Dual Fill For Lifted Trucks and Pinion Angle
Magnetic Drain Plug
ARP Hardware
Lube Locker Gasket
100% Made In USA With American Sourced Aluminum
Crafted with precision in-house American-made aluminum, the SVCOFFROAD billet rear differential cover for Ford Raptors is designed to enhance your vehicle’s performance and durability. This robust cover increases oil capacity, improving lubrication and heat dissipation to keep your differential running cooler under demanding conditions. By boosting cooling efficiency, it helps extend the life of your Ford Raptors rear differential, providing reliable protection against wear and tear. Upgrade your Ford Raptor with this high-quality cover to ensure optimal performance and long-lasting durability on and off the road.
SVC 1' Drop Shackles
Regular price
$419.00
Save $-419.00
Machined In The USA using USA Sourced Aluminum.
These SVCOFFROAD Billet Shackles Will Drop The Rear Of The Truck 1 Inch From Stock.
SVC Ford Raptor Mid Travel Slapper Arm
Regular price
$1,799.00
Save $-1,799.00
Elevate your SVC Mid Travel Kit’s performance with our advanced 2.5 Billet Slapper Arm. Building on years of market-leading innovation, this upgrade delivers unmatched bump zone control thanks to its precision-machined billet construction and compatibility with Fox, King, or Radflo 2.5in bumps. Positioned about 7 inches from full compression at neutral ride height, it ensures your bump acts purely as a bump—never interfering with your bypass tube setup when not in bump zone. For those seeking ultimate bottom-out control and peak suspension performance, the SVC OFFROAD Slapper Arm is the definitive upgrade.
PRE ORDER NOW!!!
Machined in house in the USA
Uses Fox, King or Radflow Bumps
Bottoms out equally with bump zoone tube, and jounce bump on coilover
4130 Mounting Plate
Replaceable Delren Pad
Available for brand new or existing Mid Travel setups already installed.
NOTE: This product can only be mounted to existing SVC OFFROAD Mid Travel Setups.
NOTE: WORKS WITH 4WD
Gen 2 Ford Raptor 5link Conversion Kit
Regular price
$5,227.00
Save $-5,227.00
When upgrading your truck's rear suspension, don’t settle for less. SVCOFFROAD’s Gen 2 5link conversion replaces stiff, bucking leaf springs with smooth Icon Coil Springs, delivering a remarkable performance boost. Engineered for strength and straightforward design, this kit integrates with our existing bypass rack system, allowing you to install larger 3.5-inch or 4.0-inch 5-7 tube Fox, King, or Radflo bypass shocks for enhanced tuning and control—something a single coilover can’t match. Unlike coilover setups that transfer loads to the bed rack which doesn't offer near enough strength to withstand the weight of a truck, this system directs forces straight to the frame just as seen on OEM Gen 3 Raptor preventing twisting, cracking, and failure. For taking your truck’s performance higher, this kit stands unrivaled.
IMPORTANT NOTE: If you already have an SVC bypass rack setup, you can utilize your existing bed rack, plus the shocks and bump stops which dramatically reduces cost. You will also reuse your factory Gen 2 rear axle.
100% MADE IN THE USA USING USA SOURCED ALUMINUM
What You Get With The Base Price Kit:
SVC 4130 Sheet Metal For The Chassis Side and Axle Side
SVC 4140 Billet Axle Lower Link Mounts
SVC 2.5 Weld On Bump Can
SVC 4130 Shock Mount
SVC 4130 Fabricated and Adjustable PanHard Bar (Reduces Side to Side Swing By 100% over Stock Bar.
SVC Shock Mounts
Ford OE Lower Spring Isolator
Ford OE Upper Spring Isolator
Ford OE Driver Lower Spring Mount
Ford OE Passenger Lower Spring Mount
Limit Straps
Extended Brake Lines
5 Link Hardware
Additional Items That Must Be Used In Order Work:
SVC Billet Aluminum Upper and Lower Links
SVC 4130 Fabricated Upper and Lower Links
SVC Bypass Rack
18in Shock (preferred). You Can Run a 16inch but will lose wheel travel by doing so.
If You Choose To Run Factory Take Off OEM Gen 3 Upper and Lower Links, You Need To Source Those Yourself.
RAPTOR GEN 1 VS GEN 2
2010 was the year that Ford and their Special Vehicles Team (SVT) would create a legendary truck that would go on to pull at the heartstrings of off-road enthusiasts all over, the Ford SVT Raptor. The Ford SVT Raptor was based off of the already successful F-150 platform, but was strictly a purpose-built design not just for comfortably hitting the dirt, but soaring over it. It definitely wasn’t the first production off-road vehicle, but it is sure looked at as one of the most capable ever made.
The SVT Raptor had a run from 2010-2014, but Ford took a short break from the nameplate until 2017, when they dropped the “SVT” from the name. Although the original SVT was already so well known and beloved, the 2017 model stepped it up and brought much needed improvements.
Performance
The original SVT Raptor came from the factory in 2010 with two engine options, including a 5.4L V8, and a larger 6.2L V8, the latter becoming standard in 2011. Ford realized the V8, although big and brawny, could be replaced by their new EcoBoost engines. For 2017, the second generation of Ford Raptor got the new EcoBoost twin-turbo V6, much smaller than its V8 counterparts, but creates more torque and is incredibly more efficient. The 6.2L V8 was producing 411 hp and 434 lb-ft of torque, while the EcoBoost puts out an impressive 450 hp and 510 lb-ft of torque.
Another improvement for the second generation from the first was the inclusion of a 10-speed automatic transmission, rather than the SVT’s 6-speed. The addition of a larger gearbox gave the second generation Ford Raptor much better fuel economy while also giving the Raptor more options when looking for the right gear to hit the right power band.
For suspension, the second generation Raptor gained two inches of travel in the front and rear, going from 11 inches in the front and 11.9 in the rear to 13 inches and 13.9 inches. Wider Fox shocks were also incorporated into the second generation Raptor, along with 6 new driving modes.
Although the first generation of the Raptor was so highly acclaimed, its hard to look at the performance numbers and not agree that the second generation Ford Raptor is the better performer.
Exterior
Although the general designs of the first and second generation Raptors are fairly similar, a closer inspection will show you the massive amount of aesthetic changes Ford made between 2014 and 2017. To start, the SVT Ford Raptor was a tad bit narrower than its younger counterpart, but fitting a larger wheel setup and giving the Raptor more room for travel over the F-150 led to wider looking fenders. The second generation Ford Raptor is a bit wider, so the fenders aren’t as pronounced. When it comes to the grille and headlights, the differences are unmistakable, but the FORD logo stamped across the front will always be an attention grabber.
Overall, the first generation Raptor is a bit more rounded, from its hood leading into the flush headlights, and the wider, more distinct fender flares, while the second generation Ford Raptor is a bit boxier and beefier.
Technology
It’s understandable that the second generation Ford Raptor is going to have significant technological advancements over the SVT just because of when they were made. The SVT Raptor was based off of the 2010 F-150, while the second generation Raptor was based off of a much newer platform.
Technology the second generation Ford Raptor includes over the SVT: hydraulic soft-drop tailgate, panoramic sunroof, lane-keeping system, adaptive cruise control, blind-spot monitoring, push button ignition, and more. The latest F-150 also comes standard with an all-aluminum body which got bought over to the Raptor, saving a ton of weight. As mentioned before, the newer Raptor also comes with the 6 drive modes, known as the “Terrain Management System''.
Conclusion
From 2010 to present, with a short hiatus, the Ford Raptor is no doubt the most capable and rugged production off-road vehicle ever built. And although the two generations have their differences, they each are incredible machines that can fly through the desert with ease.